IF WE DON'T HAVE IT ARE YOU SURE YOU NEED IT?.

Home > New Holland Showroom > RB560 Series
Image #56Image #57Image #58
Schedule a Test Drive

Get a Trade-In Quote

Trim is the manufacturer's way of differentiating the level of equipment installed on models of the same name. (Example: Triburon GLS, Expedition XLT, Trailblazer LS)

Give Me Your Best Price

Get More Information

RB560 Series
Overview

ROLL-BELT™ 560 ROUND BALER
5’x6’ ROLL-BELT™ BALING CAPACITY CLIMBS EVEN HIGHER EXCLUSIVE BALE-SLICE™ SYSTEM
 
For bales that are more dense, easy to feed and easier for livestock to digest, equip your Roll-Belt™ 560 with New Holland’s industry exclusive Bale-Slice™ system. Since knives enter the bale after the core is made, bales retain a solid core, and you decide how much of the bale is cut to the outside bale face. Bales made by the Bale-Slice system are up to 14% denser than unsliced and can increase the average daily weight gain in yearling heifers by 23%* plus higher production rates across the board. Now that’s SMART for the way you raise cattle! Get the most out of every season. Choose the round baler that delivers higher capacity, the industry’s widest
pickups and the highest bale density – the new Roll-Belt™ 560 baler.
 
20% CAPACITY INCREASE*
20% BELT STRENGTH INCREASE*
20% INCREASE IN BELT DRIVE FORCE*
 
This reliable, restyled 5’x 6’ baler delivers higher baling capacity thanks to a long list of
field-tested innovations:
NEW ActiveSweep™ 82-inch four-bar or five-bar pickups.
NEW Better windrow feeding ability in a wide range of crops and baling conditions
NEW Simplified net wrap and twine wrap tying systems
NEW Belt choices, including premium endless belts and low-profile Alligator™ rivet
fasteners with Duralink™ flex pins on premium laced apron belts
NEW Monitor choices, including Bale Command™ Plus II or IntelliView™ III with ISOBUS
*performance versus BR7090
 
SPECIALTY CROPS
The Specialty Crop Roll-Belt 560 is designed to handle tough conditions and high-volume
crops like cornstalks or large windrows of heavy grasses like sudan or even straw. It features
the heavy-duty ActiveSweep™ five-bar pickup with HD rubber tines, solid two-piece
tine bars and a roller windguard. It also features crop guides to reduce crop catching on
gauge wheels, fingers on the external expeller roll to remove in-chamber debris and a
duckbill trash baffle that cleans net wrap during each wrapping cycle.
 
Available on Width Width Number Pickup Type These Baler Models Tine-to-Tine Flare-to-Flare of Teeth
SuperSweep™ pickup, Roll-Belt 560 1.5m Dry Hay 60 in. 68 in. 144 6-bar
ActiveSweep™ pickup, Roll-Belt 560 2.0m WPU 82 in. 90 in. 128 standard-duty 4-bar
ActiveSweep™ pickup, Roll-Belt 560 2.0m Specialty Crop 82 in. 90 in. 160 heavy-duty 5-bar Roll-Belt 560 2.0m Bale-Slice™
 
UNMATCHED PICKUP CAPACITY
From the moment the pickup tines touch the windrow, the Roll-Belt™ 560 handles your crop with more speed and efficiency than other designs.
 
NEW ACTIVESWEEP™ PICKUP INDUSTRY-LEADING CAPACITY WITH CLEANLINESS
New Holland “kept the best and changed the rest” for the new ActiveSweep™ pickup, available in standard-duty four-bar and heavy-duty five-bar versions. Both are 82 inches wide from tine to tine and feature stronger construction such as double spider plates on five-bar and single spider plates on four-bar, stronger formed pickup bands and a 10% thicker reel hex drive shaft. The stronger, two-inch-diameter, four-bar, standard-duty pickup reel tube is a 23% improvement over previous models. The five-bar heavy-duty pickup reel features solid tine bars and a two-piece design, leaving no joints at the spider. Both are available with a new-design roller windguard or a new, articulated-design tine windguard. You also have a choice of pickup gauge wheels including the standard New Holland gauge wheels, new straight-arm quick-adjust gauge wheels or new bent-arm, quick-adjust castering gauge wheels that reduce ground
scuffing on sharp turns and improve ground-following accuracy. The redesigned pickup end flares improve crop flow and reduce the chance for crop pinching.
 
ACTIVESWEEP™ AND SUPERSWEEP™ PICKUPS  NEW HIGH-EFFICIENCY FEEDER AUGER
Both ActiveSweep pickups use a new, double-flight, overshot feeder/auger design to replace the stuffer used on previous models. The design combines the feeder and augers on a common shaft to move crop efficiently from the pickup to the bale formation area. The feeder tines are arranged in a “W” pattern for efficient crop feeding into bale chamber. Long wear UHMW plastic feeder strippers direct crop flow off tines and into the bale chamber. The ends of the auger extend beyond the bale chamber opening for complete packing of the bale sides. The feeder/pickup drives are protected with a radial pin clutch.
 
THE RESULT?
A 20% INCREASE IN PICKUP CAPACITY
The many ActiveSweep design innovations add up to an impressive 20% increase in capacity and perfect, square-shouldered bales.
 
THREE PICKUP CHOICES
THE HEAVY-DUTY, FIVE-BAR ACTIVESWEEP™ PICKUP USES:
NEW Two-piece, solid-steel tinebars with dual tinebar cams
NEW Stronger, rubber-mounted, heavy-duty, six-millimeter steel curved tines—32 double tines per bar for 160 tines total
NEW Four double-plate reel spiders to carry the tinebars
NEW Larger-diameter in-feed augers
NEW Improved stronger pickup bands
NEW Improved bolt-in dividers that run the full-length of the backbone
NEW Cut out clutch for overload protection on Bale-Slice and Specialty Crop models, as well as a built-in declutching system on all balers to shut down belts during bale ejection
NEW Castering quick-adjust gauge wheels
 
THE STANDARD-DUTY, FOUR-BAR ACTIVESWEEP™ PICKUP USES
NEW Two-piece tinebars pinned in the center with dual tinebar cams
NEW 24% stronger five-millimeter steel coil tines that are curved and shot-peened—32 double tines per bar for 128 tines total
NEW Optional bolt-in, full-length pickup dividers that run the full length of the backbone
NEW Three plate-type reel spiders carry the tinebars
NEW Castering, quick-adjust gauge wheels
 
THE 60-INCH, SIX-BAR SUPERSWEEP™ PICKUP USES
Six tine bars, single cam 144 curved steel tines spaced 2.6 inches apart Articulated tine windguard Single adjustable-height pickup gauge wheels 60-inch, six-bar SuperSweep™
pickup shown with optional dual adjustable-height pickup gauge wheels.
 
STAY INFORMED WITH YOUR CHOICE OF MONITOR
You monitor and control the bale-making process with the new Bale Command™ II (twine only)/Bale Command™ II Plus (twine and net, twine only, or net only) system.
Or, go ISOBUS with the IntelliView™ III color touchscreen monitor (IntelliView™ IV available
through parts). Bale fill sensors on the side of the bale chamber use a new, more durable
heat-treated arm. Sensor readouts are displayed as bar graphs on the monitor.
 
FAST CORE STARTS AND DENSE, UNIFORM BALES IN ANY CROP
New Holland’s proven combination of rolls and belts gets hay rolling quickly for fast, reliable core starts and helps you pack more hay into every bale. Why does density matter? When you pack more crop into every bale, you save on wrapping and retrieval costs, use less fuel, reduce soil compaction and plant damage, improving regrowth. Higher-density bales hold their shape, stand up to the weather better and they’re easier to handle, transport and stack. It’s New Holland SMART for the way you want to make hay.
 
NEW SIMPLIFIED NET WRAPPER EXCELLENT VISIBILITY AND EASY LOADING
The net knife and wrapper are now controlled by separate motors, reducing amperage draw on the system. The net knife now moves up to cut the net, pulling the net into the knife for more positive cutting action. The New Holland front-load net wrapping system is highly visible so it’s
easy to watch your baling operation running smoothly from the tractor seat. A simple, shorter, more efficient net travel path makes it the industry’s most reliable system, with less chance for misfeeding.
 
ROLL-BELT™ DESIGN
The sealed, adjustable dual hydraulic density control system assures consistent, high density
baling.
 
NEW TWINE WRAP SYSTEM WITH SIMPLIFIED ADJUSTMENTS
Dual twine tubes move across the bale from the left side of the baler to the right and back again for a controlled, consistent wrap pattern across the bale face. You can change the twine tube spacing and speed to control twine spacing. You can carry up to eight active balls of twine up front with up to four additional twine balls on spare carriers on either side of the baler.
 
NEW THREE BELT CHOICES
Choose standard New Holland MRT (Mini-Rough Top) Clipper laced belts with three plies of poly fabric and top and bottom layer of rubber. Premium laced belts (shown) are manufactured with constant heat and pressure to eliminate belt flaws and improve tensile strength. They feature new low-profile Alligator™ rivet fasteners with Duralink™ flexible pins. For ultimate durability and low maintenance, new endless belts feature a completely spliceless design for maximum consistency and wear resistance. They offer the best balance of durability, sure grip and delicate handling.
 
NEW RELOCATED BACKWRAP ROLL PROVIDES MORE BELT DRIVING FORCE
The backwrap roll is located lower and further forward under the apron drive roll. This increases the surface area contact between the belt and roll, improving driving efficiency and reducing belt slip by 20% in all crops.
 
NEW FRAME PROTECTION
A replaceable wear plate next to the sledge roll frame protects the frame from wear and can be
replaced easily if needed.
 
SPECIFICATIONS
Roll Belt 560 Round Baler
Bale Size
Diameter in.(cm) 36-72 (91.5-182)
Width in. (cm) 61.5 (156)
Weight lbs (kg) 500-2500 (227-1134)
Density pressure psi (kPa) Adjustable
 
Baler Dimensions and Weights*
Overall width in. (cm) 128.5 (326.3)
Overall length, tailgate closed in. (cm) 188.6 (479)
Overall length, tailgate open in. (cm) 188.6 (479)
Overall height, tailgate closed in. (cm) 122.2 (310.3)
Overall height, tailgate open in. (cm) 178.7 (454)
Shipping weight lbs. (kg) 7450 (3379)
*equipped with 21.5L tires/wheels
 
ActiveSweep™ 5 Bar Pickup**
Overall width in. (cm) 120.3 (305.6)
Width, tine-to-tine in. (cm) 81.5 (207)
Width, flare-to-flare in. (cm) 90 (228.4)
Tine spacing in. (cm) 2.6 (7)
Tinebars 5
Number of tines 160
Reel diameter in (cm) 12.5 (31.5)
Pickup protection radial pin clutch
** equipped with dual, castering gauge wheels
 
ActiveSweep™ 4 Bar Pickup***
Overall width in. (cm) 116.3 (295.3)
Width, tine-to-tine in. (cm) 81.5 (207)
Width, flare-to-flare in. (cm) 90 (228.4)
Tine spacing in. (cm) 2.6 (7)
Tinebars 4
Number of tines 128
Reel diameter in (cm) 12.5 (31.5)
Pickup protection radial pin clutch
*** equipped with dual, no-tools adjust gauge wheels
 
SuperSweep™ Pickup****
Overall width in. (cm) 88 (224)
Width, tine-to-tine in. (cm) 60 (152)
Width, flare-to-flare in. (cm) 68 (174)
Tine spacing in. (cm) 2.6 (7)
Tinebars 6
Number of tines 144
Reel diameter in (cm) 16 (41)
Pickup protection adjustable slip clutch
**** equipped with dual, standard gauge wheels
 
Bale Forming Chamber
Floor roll
ActiveSweep Pickup in. (cm) 8 (20.3)
Standard Pickup in. (cm) 12 (30.5)
Forming rolls in. (cm) 3 rolls, 10 (25.4)
Stripper roll in. (cm) 10 (25.4)
Starter roll in. (cm) 7 (17)
Bottom tailgate idler roll in. (cm) 5.5 (14)
 
Belts
Number of belts 8
Width in. (cm) 7 (18)
Length in. (cm) 421 (1068)
Surface type (1) MRT or Self Cleaning
Endless belts (1) dependant on belt type
 
Twine System
Twine application Dual twine arms
Twine control automatic, electric
Twine storage capacity 8 balls
 
EdgeWrap Capability l Bale Forming Indicators
Bale size l
Left/Right Driving gauges l
Twine movement l
Twine arm position l
Bale counter l
Bale ejector l
Hydraulic pressure gauge l
Tailgate latch l
 
Tractor Requirements
PTO HP (minimum) HP (kW) 80 (60)
PTO speed (rpm) 540/1000
PTO protection Cut-out clutch
Hydraulic remote required 1 or 2
 
Tire Options
Implement tires/wheels 31 x 13.5-15, 10PR
Low profile flotation tires/wheels 18L x 16.1SL, 10PR
High profile flotation tires/wheels 21.5L x 16.1, 10PR
l Standard O Optional
 
TIRE CHOICES
Flotation tires take the bumps out of baling in rough fields to improve ride quality while reducing soil compaction. Choose, from right to left:
1. high flotation (21.5L x 16.1, 10PR),
2. low-profile flotation (18L x 16.1SL, 10PR) or
3. implement tires (31 x 13.5-15, 10PR).
 
BALE EJECTION CHOICES
The optional hydraulically actuated bale ramp (shown) lowers as the tailgate starts to rise, and then raises before the tailgate starts to close. The Roll-Belt 560 comes standard with a mechanical spring-action bale ramp or you can option down and build it without a ramp.
 
OPTIONAL CROP GATHERING WHEELS
Pickup-mounted crop gathering wheels extend the reach of the pickup to gather windblown,
overwidth or bulky windrows. Durable urethane finger discs follow the ground, move with the
pickup, pivot up for protection and can be flipped up when not in use.
 

 

RB560 Series - Blog
No blog posts found.