(Posted on Apr 10, 2021 at 09:43PM by Darby Riales)
If you have noticed that your windshield wipers aren’t doing as good of a job as they used to, it might be time to replace them with a new set. Over time and with frequent use, they tend to wear down. Even excessive exposure to the sun with little use can cause the rubber to disintegrate.
Â
Changing out the blades on any vehicle is quite simple. The first step is to identify the type of wipers your car has. There are three kinds to choose from. Frame is the most common, and they only require you to switch out the old rubber insert instead of the entire blade. Winter is another type that is popular here in BC since it can withstand heavy use in harsh weather. Finally, Single Beam wipers require the entire blade to be changed. You also need to measure your current set of blades to determine what size you need to replace them with. Be sure to write the numbers down because they aren’t necessarily the same length.
Â
Once you have figured out which type you have, you can unlatch the hooking mechanism to take the blade off. Remove any plastic from the new set of wipers and latch them into place.
Â