If you need to replace the door weather strip on your 2018 to 2020 Ford Expedition, then you are in luck! Ford Parts BC has OEM pieces that you can easily swap out with the old ones. 

This particular assembly is for the left side, but you can get the same style for the right side as well. It is compatible with the following trim levels:

• King Ranch
• Max King Ranch
• Limited 
• Max Limited 
• Max Platinum
• Platinum
• Max SSV
• SSV
• Max XL
• XL
• Max XLT
• XLT

While it is very important to keep your Ford vehicle washed, it is also necessary to wax the exterior with each cleaning. Designed to protect the paint, this will ensure a much longer lifespan for your model’s cosmetic looks. It also forms a barrier against rust.

The wax preserves your car’s colour and slows down the oxidation process that is brought on by inclement weather, pollution, sap, and even bird droppings. It also keeps the outside looking shiny and new, which is always nice. Follow these easy steps to maximize the protection level of your wax application.

First, you can find wax in various forms including paste, liquid, and spray. However, the best one is the paste, hands down. While the liquids and sprays are quicker to apply and gentler on the arms, the carnauba wax offers the longest-lasting finish. It sticks to the metal and won’t wear off for a while.

Next, use a damp sponge to apply a thin, even coat of wax all over the car. Be careful not to use too much, or you will be left with residue. Next, use a soft, clean cloth made of either microfibre or cotton to remove the dried wax. Now you have a pristine automobile!

Contact Ford Parts BC to order exterior replacements.

If you own a 2021 Ford Edge or Bronco, then you may want to add a cargo box to the roof.

This rack-mounted kit can hold skis and snowboards that measure up to 185 cm in length. Gear for three people can also be stored here. It has a dual-sided opening for easy access, and it comes with locks to secure it to the top of the SUV. Finally, hatch durability is improved by internal lid stiffeners.

Contact Ford Parts BC to order yours now!

When it comes to maintenance, keeping the outside of the vehicle clean should be routine. This includes during the winter months. Although many people tend to skip out on washing their cars during the colder season, it is very important to continue doing so.

The reason you need to do this is because the slush, ice, and dirt mixture combined with the salt used to de-ice roads can wreak havoc on your paint job. Not only that, but it can also cause corrosion underneath the automobile. What’s even worse is that you probably would never notice the damage until you had it serviced later on.

Corrosion leads to rust, which you want to avoid at all costs. When temperatures plummet and the snow begins to fall, you need to make the undercarriage is rinsed on a regular basis. Any hard-to-reach sections also need to be washed off. These include bumpers, wheels wells, and any other area that may be susceptible to rust.

It is recommended that you use a bucket of warm water to handle this task. The hose will be frozen, and cold water is too painful to deal with during this time of year. You can also visit a local car wash.

Contact Ford Parts BC to find exterior accessories!

If you have tested out the brightness of your headlights and found that they aren’t as illuminating as you would like, then it may be time to replace them. Luckily, it is very easy to do at home by yourself.

First, you need to wear protective gloves and goggles during the process. This is standard as you will be getting into tight - and tough - spaces. It’s also best to replace both bulbs even if only one is out. This will ensure that they are even.

Next, if your vehicle has two bulbs per casing - one for high and one for low beams - then you need to identify which is which. The low beam bulb is usually on the outside, and the high one is typically on the inside.

Now it’s time to get into the unit itself. Some are easy to get into by removing a few screws. Others require access gained through the wheel well. It’s best to pop the hood in any case and be sure to read your owner’s manual for specific instructions.

Then, remove the plug for the bulb by releasing the clip with a small screwdriver. Next, take out the old bulb by turning it counter-clockwise. Install the new one by turning clockwise until you hear a click. Once you’re done, test them out before you hit the road.

Contact Ford Parts BC for replacement parts!

If you need to replace components on your vehicle, ordering online is the easiest way to go about it.

You do not need to leave your house, you have access to the largest selection of OEM parts, and you can track your packages progress every step of the way. Gone are the days of going to an auto body shop just to find that they don’t have what you need in stock!

Contact Ford Parts BC to begin your online order today.

The quickest way to age a vehicle is to let the headlight casing get dingy. That yellow hue puts 20 years on a car, easily. Caused by sun exposure, this issue can be prevented with the right maintenance.

It may sound strange, but good old fashion toothpaste with a toothbrush will go a long way. Put some paste on a cloth or towel and rub it all over the plastic light housing units. Follow that up with a toothbrush scrubbing. You can then rinse it off, and you will notice how clean and shiny it is.

This cleaning combo isn’t just good for the exterior of the vehicle either. You can also use these products to make the inside look a lot better. It serves as a polish to leave your cabin shining as if it were new again. Keep in mind that professional products are available for these specific purposes. However, these tips are for people who want to save a bit of money.

If your headlight casings are beyond a bit of elbow grease, then you may need to replace them. Luckily, you can find the correct pieces at Ford Parts BC. Swapping your old ones out will shave years off of your vehicle, and it will make you feel better about driving it!

Whether your vehicle is old or new, keeping it in mint condition is important. Not only does proper maintenance prolong the life expectancy of each component, but it also keeps your automobile looking great.

To help out your windshield wipers, you can rub them down with alcohol. First, you need to lift them up into a standing position. Then, clean them with soap and water. After that, dip a cloth in rubbing alcohol and apply it to the blade. This will prevent the wipers from smudging the glass when they are activated.

Another trick for the exterior is to wipe the panels down with dryer sheets. This will get any hiding insects off of your car, and it will prevent them from coming back. It may seem like a strange trick, but it works.

As for the interior, did you know you can use a vacuum and brush combo to clean off the dashboard? There are a few places that a microfibre cloth simply can’t get to. Using a soft bristle brush a portable car vacuum, you can get all of the dust and debris out of the tiny crevices.

Would you like to buy new windshield wipers? Contact the agents at Ford Parts BC to place an online order now!