If you are searching for a replacement bracket for your Ford Fiesta from 2013 to 2019, then you have come to the right place.

This OEM part is designed for the upper right side of the vehicle. It is sometimes referred to as a CV Axle Shaft Carrier Bearing Bracket or a Support Bracket. It works for manual and automatic transmission models, and it is compatible with the following trim levels from the aforementioned years:

• S
• SE
• ST
• ST-Line
• Titanium

Contact the team at Ford Parts Bc to start your online order today!

It is no secret that exterior components tend to wear down first over the years. However, you can replace just about any piece of your Ford vehicle with the help of this online catalogue.

For example, you can get a wheel opening moulding retainer clip for a 2011 Ford Transit Connect. This hardy, plastic piece works for right or left positions, and it is compatible with the following 2010 to 2013 models:

• XL
• XLT
• XLT Premium

Please note that the Electric version may require different parts.

To begin an online order, contact the team at Ford Parts BC now!

Over the years, some elements - especially rubberized ones - on vehicles can wear down due to exposure to the sun and weather. However, you can replace most pieces - such as the upper weather strip - on models like the 2013 Ford Transit Connect XLT Premium easily. 

The piece pictured is the stepping for the door opening on the left side of the commercial van. It comes with a one-year warranty and is guaranteed to fit since it is an OEM part. The following 2010 to 2013 models are eligible:

• XL
• XLT
• XLT Premium

Do you need a replacement lock cylinder for your Ford Transit Connect? If you said yes, then you have come to the right place. Ford Parts BC has OEM pieces designed to fit your model precisely.

This particular kit provides you with the complete assembly. you can swap the old one out for a new component yourself, and it is protected under a 12-month warranty. The following Transit Connect models from 2010 to 2013 are compatible:

• XL
• XLT
• Electric
• XLT Premium

Contact Ford Parts BC to begin an online order today!

Compatible with only a few select vehicles, this duct assembly is designed to fit with the 3.5 litre turbocharged V6 engine. Sometimes referred to as a tank unit, this piece comes with an intercooler.

The following specific models are eligible for this OEM part:

• 2010 - 2019 Taurus SHO
• 2010 - 2019 Flex (trims vary by year)
• 2013 - 2019 Police Interceptor Base

The only Flex models that can use this piece include the Limited, SEL, and Titanium. However, you need to refer to the available chart to see which years apply.

Get in touch with the experts at Ford Parts BC to order yours today!

If you need to replace the Ford emblem on your vehicle, then you have come to the right place.

Compatible with select models produced between 2006 and 2016, this nameplate is easy to install. The SHO, coupe, and sedan body styles are all eligible for this piece. Please note that the Ironman Package, Eddie Bauer, and Lariat Chrome Package are not compatible.

The following models from the aforementioned years can use this emblem:

• Fusion
• Freestyle
• Five Hundred
• Explorer
• F-150
• Taurus
• Focus
• Explorer Sport Trac
• Escape

Contact the experts at Ford Parts BC to order yours today!

Although the 2013 to 2015 Ford Taurus SHO is the perfect fusion of athleticism and luxury, it does require some unique parts that are only compatible with select vehicles. Luckily, you can find everything you need for this model at Ford Parts BC.

This wire harness is the complete assembly that is necessary for the Taurus SHO with the 3.5-litre turbocharged V6 engine. It is a front-mounted system sold as a complete unit with a 12-month warranty.

Contact the agents at Ford Parts BC to order yours today!

If you need to replace the nameplate of your Ford, then you are in luck. This particular piece is compatible with 63 various vehicles produced between 2005 and 2020.

This AWD emblem is made for the rear decklid. It can sometimes be called a hatch emblem, and it can be applied to the following models from the aforementioned years:

• Freestyle
• Five Hundred
• Fusion
• Edge
• Taurus X
• Taurus
• Flex
• Police Interceptor Sedan
• Special Service Police Sedan

Contact the team at Ford Parts BC to order yours today!

Although the Ford Fiesta is no longer in production, you can still find OEM parts for your vehicle whether it is a sedan or hatchback body style.

For models equipped with the 1.6-litre non-turbocharged motor with an automatic transmission, you can get a replacement for the upper right bracket. This is sometimes referred to as a CV Axle Shaft Carrier Bearing Bracket. The following models from 2011 to 2019 are eligible for this piece:

• S
• SE
• SEL
• SES
• ST
• Titanium
• ST-Line

Contact Ford Parts BC to order one now!

If you own a Ford Fiesta that was produced from 2014 to 2019, then it may be time to purchase a replacement for the overhead console.

This particular assembly serves as a mini storage bin. It contains a holder for your sunglasses so that they don’t get lost or broken. The following trim levels from 2014 to 2019 are eligible for this OEM part:

• S
• SE
• ST
• Titanium
• ST-Line

Would you like to order one? Contact the experts at Ford Parts BC to get started!