If you need to install a new roof rack and are missing a key component to do so, you can find one at Ford Parts BC.
The roof rack retainer is the piece (or nut) that fastens the side rails to the top of the vehicle. It can be used on the left or right section, and it is guaranteed to fit all trim levels of the Ford Edge from 2015 to 2020.
Ford SUVs are designed for fun and adventure. Many come standard with roof rails, and others can have this piece added onto the top later. While these handy parts come in various styles to carry different items, there are a few rules to follow to help extend their life expectancy.
First, you should always read the owner’s manual about weight limits. The roof load specification of your SUV should be taken into consideration before you add anything. A typical roof rack system can hold between 68 and 90 kg (150 to 200 lbs). This is enough to accommodate extra luggage. It is also the equivalent of three sheets of 17-mm (3/4-inch) plywood. Overloading the rack can cause premature wear and tear to the vehicle, and no one wants that.
Depending on the model you own, there are many different styles you can get to serve various functions. For example, you can find a rack-mounted piece that is made specifically for kayaks or canoes. Another for bicycles is a good option. You can also get cargo boxes that are water-tight or even a basket. Whatever you decide on, be sure you understand its limitations before you load up.
Most new vehicles now come with a standard automatic transmission. However, more athletic models may have something known as an automated manual. In this article, you will learn the main difference between the two.
An automatic transmission uses a system of planetary gear sets, clutches (bands), and a torque converter. It has the ability to switch gears with little input from you as the driver.
On the other hand, an automated manual is a traditional clutch-style manual transmission that is combined with an electronic actuator. (This part can also be pneumatic or hydraulic.) Instead of a third clutch pedal, it comes with a mechanical shift lever. Using this, you can choose between automatic and driver-controlled shifting modes. If you are someone who enjoys feeling like you have full command over the power and performance of the vehicle, this is a good option for you. It is sometimes referred to as a direct shift gearbox or sequential manual gearbox.
You can purchase OEM parts that are designed specifically for your Ford vehicle’s transmission type. From torque converters (pictured) to bands and shifters, you can find precisely what you’re looking for at Ford Parts BC. Use the online store to search for specific elements or contact their team today!
The first maintenance tip for protecting every exterior part of your Ford is to park the vehicle in a garage or carport. If this is unavailable, then it is recommended that you find a shaded area or use a car cover.
However, accidents happen. Everyone has experienced the rogue rock on the highway that causes an annoying chip in your windshield. When this happens, you need to address it immediately. Even small amounts of damage can grow to massive (and dangerous) cracks down the road. Take your vehicle to a repair shop to fill in the damaged section and improve clarity.
Next, make sure to swap out your wiper blade every six to twelve months. The frequency will depend on how often you use them.
Another tip is to never put any liquid inside the windshield washer reservoir except for washer fluid. Do not put water inside this compartment - especially during the winter. It can freeze and cause significant damage. Also, don’t run the system dry. This can wreak havoc on the pump. Finally, if there is damage to the tank, it should be fixed immediately.
Bad lighting on a vehicle can be extremely dangerous to drive with, especially at night and during inclement weather. Luckily, there are a few things you can do to save your exterior lamp fixtures.
If your car, truck, van, or SUV has a cracked light or turn signal cover on the back, you need to address it immediately. Leaving it unchecked can allow water to enter the housing unit, which can cause some serious damage to the electrical system. The light compartment is an important element, and you can temporarily fix a crack with something as simple as tape. You should select the red or orange type of tape that is made specifically for this purpose. It will prevent moisture from entering the casing.
Next, if you have a bulb that is burnt out, you should replace it as soon as possible. When you do this, it is recommended that you thoroughly clean any corroded or dirty sockets. You can do this with a wire brush or some steel wool. After you have loosened any grime, you need to wipe the socket clean before installing the new bulb.
Many Ford vehicles boast either cloth or leather interiors depending on the make and model. If you are looking for a way to preserve and care for these materials, then you have come to the right place.
Higher trim levels tend to come with cowhide seating, which is very durable. However, it can become soiled over the years and may need some extra TLC. The best thing you can do for leather upholstery is to keep it clean by removing dirt and particles. Then, apply a protective layer to make it less susceptible to stains. You should look for one that has a conditioner included and is formulated for top-coated grain or pigmented leather. This will ensure that cracking doesn’t happen with age.
Next, cloth can be treated the same way you treat soft-touch furniture in your home. You can use home cleaners, but you should always avoid saturation. You don’t want to get the fabric too wet. Foam solutions are great and can be easily wiped off with a brush. You can also spray on a fabric protectant.
Finally, if you have small children, you should place a towel or heavy plastic underneath the baby seat to catch any spills.
Also sometimes referred to as an electrochromic rearview mirror, the auto-dimming rearview mirror will dim the reflection from the headlights of other vehicles on the road at night.
Electrochromic materials change colours they are charged with an electrical current. For example, it will darken if you were to send a volt throughout and brighten up again once the voltage is removed. This is a chemical reaction that is jumpstarted by electricity. Applying this technology to a rearview mirror causes the surface of the mirror to darken when a light source hits it. In other words, it changes the way the glass reflects light.
This type of mirror also typically has cameras and photodiode-based photodetectors (sensors) that are sensitive to light. Known as semiconductors, they can transform light into a current. Attached to a microprocessor that detects headlight glare, the current (or volt) is sent through the electrochromic material - which then responds by darkening.
The mirror is comprised of two glass layers with gel in between. This is the space in which the electrochromic material resides. It is what darkens when harsh light hits it. Please keep in mind that some models may also come with a camera display.
Compatible with 30 vehicles, the front bracket bolt can be used for a wide range of parts.
Its main job is to hold other components in place. This particular piece can be installed on the left or right side in the front or back of the automobile. Other names that you may know it by include: carrier assembly screw, sensor bolt, exhaust system hanger, and many more. Some of the models you will find on the list include the 2013 to 2019 Taurus and the 2018 to 2020 Expedition.
Many modern vehicles now come with anti-theft systems that are designed to keep intruders at bay. At Ford Parts BC, you can find replacement pieces for yours.
The first term you may hear about is the alarm. This device transmits an audible signal when unauthorized access to the car is detected. Some are extra sensitive and will go off if you simply bump into the automobile.
Another thing you need to know about is the anti-theft code. This is a four- to six-digit number that can return functionality to the audio head unit once it has been disconnected from the battery.
Next, you may have heard about the immobilizer. This electronic mechanism works in unison with a key fob. When this piece is not present, the engine will not start. Finally, the last component is the remote control. Responsible for unlocking doors and trunks, it is the most critical element that makes up the system. So are so advanced that you don’t need to press any button. Others may also have control over the sunroof and windows.
If you own a Ford Expedition from 2018 to 2020, then it may be time to replace protective parts such as the front or back sill plates.
Serving as scuff pads for shoes, these elements prevent damage to the doors. This particular unit is for the left front section of the vehicle - otherwise known as the driver’s side. It is in the colour Coffee. The following trim levels (Max included) are compatible with this sill plate: