If you own a Ford Mustang from 2018 to 2022, then you may want to invest in a vehicle cover. Designed to prevent premature aging due to exposure, this full piece from Weather Shield is perfect to defend the paint job from the elements.

The following trim levels from the aforementioned years are eligible for this component:

• Ecoboost
• Ecoboost Premium
• GT
• GT Premium
• Shelby GT350
• Shelby GT350R
• Bullitt
• Shelby GT500
• Mach 1

Please keep in mind that it can be used with hardtop and convertible coupes.

The fabric uses Nextec encapsulation which is ideal for long-term storage. It features a silk-screened logo on the front and the Mustang logo on the rear. It can be applied with or without a spoiler.

Other exterior components of the Mustang include 17- to 19-inch wheels and adjustable side mirrors. Higher trims may also include active exhaust which is responsible for producing the iconic roar coming from the engine every time you step on the accelerator. If yours comes with the High-Performance Package, it will also include summer tires, larger 4-piston caliper brakes, a front-mounted air splitter, a shorter differential ratio, and a revised suspension that is made for the racetrack.

Contact the agents at Ford Parts BC to begin your online order!

If you need to replace the nameplate of your Ford, then you are in luck. This particular piece is compatible with 63 various vehicles produced between 2005 and 2020.

This AWD emblem is made for the rear decklid. It can sometimes be called a hatch emblem, and it can be applied to the following models from the aforementioned years:

• Freestyle
• Five Hundred
• Fusion
• Edge
• Taurus X
• Taurus
• Flex
• Police Interceptor Sedan
• Special Service Police Sedan

Contact the team at Ford Parts BC to order yours today!

If you own a 2019 Ford Edge Titanium, then you may be ready to update the exterior with a few handy accessories. Currently in stock at Ford Parts BC, you can have OEM components delivered straight to your door.

Make: Ford

Model: Edge

Power

Engine: 2.0 L Turbocharged Ecoboost 4-Cylinder.

Transmission: 8-Speed Automatic.

Drivetrain: FWD or AWD.

Horsepower: 250 hp

Torque: 280 lb-ft

Exterior

The 2019 Ford Edge Titanium rides on 19-inch wheels and includes front glass that reduces noise pollution inside the cabin. Automatic headlights, rear parking sensors, and a high-tech keyless entry pad are also provided for your safety and convenience. To increase the vehicle’s storage capacity, you can get a crossbar mounting kit. Designed to be used with the factory-installed roof rails, this added luggage rack provides more points for securing items. Please note that it is not compatible with models that have a sunroof.

Cargo

The 2019 Ford Edge Titanium comes with an upgraded hands-free liftgate that allows quick access to the cargo compartment. With all five seats in use, this space measures 1,110 litres (39.2 cubic feet). You may also fold the back row down to expand the area to a maximum of 2,078 litres (73.4 cubic feet).

Contact Ford Parts BC to find everything you need for your 2019 Ford Edge Titanium!

If you own a 2020 Ford Mustang Ecoboost, then you may be surprised to learn that it is eligible for a few Track Pack upgrades. You can find all accessories for this particular trim level available at Ford Parts BC.

As the base model, the Ecoboost is powered by a turbocharged 2.3-litre four-cylinder engine. This puts the performance at around 310 hp and 350 lb-ft of torque. Whether your vehicle comes with the standard 6-speed manual or optional 10-speed automatic transmission, it will include an electronic line lock.

Riding on 17-inch wheels, this is the perfect coupe for people who want to experience the thrill of a muscle car without compromising on daily driving comfort.

You can add a spoiler from the Shelby GT350 Track Pack to improve the Mustang’s overall aerodynamics. This raised rear decklid was first introduced into the design of the iconic GT350 back in 1965. Featuring an Absolute Black Clearcoat finish, it enhances the capabilities of the car without stunting the esthetic. The kit includes the spoiler piece, a drill template, and mounting hardware. You can install it yourself in under an hour.

Contact the team at Ford Parts BC to begin your online order today!

If you own a Ford Mustang that was built between 2019 and 2022, then your vehicle is eligible for a set of parking lamp curtains. You can order a set at Ford Parts BC right now!

Attaching the grille and front bumper area, these flanking accents will help to ramp up the intensity factor of your headlights. They look fantastic with LED bulbs, and they give the face a more aggressive appearance.

There are many other exterior elements that you can get for the Mustang. Covers to protect the bumpers from dings and diffusers to help improve the vehicle’s overall aerodynamics are available for purchase. You can also find replacement fenders, impact bars, and side supports. Even the iconic pony emblem can be changed out. Keep in mind that all of the parts are OEM, and they are each designed to fit this model precisely.

The following 2019 to 2002 trim levels are compatible with the parking lamps curtains that are pictured above:

• Bullitt
• Ecoboost
• Ecoboost Premium
• GT
• GT Premium
• Shelby GT350
• Shelby GT350R
• Shelby GT500
• Mach 1

Are you ready to begin your online order for OEM parts? Get in contact with the team of friendly agents at Ford Parts BC to get started or get more information.

Although the Ford Fiesta is no longer in production, you can still find OEM parts for your vehicle whether it is a sedan or hatchback body style.

For models equipped with the 1.6-litre non-turbocharged motor with an automatic transmission, you can get a replacement for the upper right bracket. This is sometimes referred to as a CV Axle Shaft Carrier Bearing Bracket. The following models from 2011 to 2019 are eligible for this piece:

• S
• SE
• SEL
• SES
• ST
• Titanium
• ST-Line

Contact Ford Parts BC to order one now!

One of the most commonly known pieces of a vehicle is a bumper. Designed to serve as a supplemental device that shields the frame and body of the vehicle from damage due to a collision, it is an important aspect.

There are several other pieces that go with the front and rear bumpers. The brackets are used for mounting it to the car, and the U-nuts secure it in its place. These can also be used for the following attachments:

• Rocker Moulding
• Lower Cover
• Splash Shield
• Valance Panel
• Fender Liner
• Deflector
• Lamp Bezel
• Grille
• Side Support
• Wheel Flare
• Floor Pan
• And so much more

Covers can also be purchased to act as a shield for the bumpers. Essentially, it is protection for the protection. Various types can be bought that come with or without sensors.

The rearview camera is typically mounted just underneath the back bumper. This gives it the perfect angle to capture any potential obstacles behind you. Newer vehicles may also be equipped with a rear parking sensor system. These sensors are also connected to the bumper.

Would you like to begin your online order today? Get in touch with the team of experts at Ford Parts BC to get started!

Not every Ford Mustang is built with a vent on the nose. However, you can add an exterior piece - called a louver - to the hood to get a more athletic look without altering the vehicle. All trim levels from 2019 to 2022 are currently eligible for this particular attachment.

This scoop assembly boasts a faux honeycomb style to give the outside of the Mustang a more aggressive appearance. Constructed from polyurethane, it is rugged and durable for long-lasting use. While it is painted matte black, you may opt to change the colour to suit whatever esthetic you are going for. It is easy to install and does not require a drill.

Other pieces you may want to add to the exterior of your Mustang may include hood scoop support and various types of nuts including the under-cover U-nut. You can even get an entire hood replacement if necessary. Some of the parts may not be compatible with certain production years or trim levels. You can take a look at the online catalogue to find specific components for your model.

Are you ready to begin an online order with the team at Ford Parts BC? Get in touch with their agents now!

If you own a Ford Fiesta that was produced from 2014 to 2019, then it may be time to purchase a replacement for the overhead console.

This particular assembly serves as a mini storage bin. It contains a holder for your sunglasses so that they don’t get lost or broken. The following trim levels from 2014 to 2019 are eligible for this OEM part:

• S
• SE
• ST
• Titanium
• ST-Line

Would you like to order one? Contact the experts at Ford Parts BC to get started!

Available only as a hatchback, then the 2015 Ford Fiesta ST offers a sportier appearance and performance than its sedan siblings. With OEM parts readily available for purchase from Ford Parts BC, you can find exactly what you need for your model.

Make: Ford

Model: Fiesta

Power

Engine: 1.6 L Turbocharged 4-Cylinder.

Transmission: 6-Speed Manual.

Drivetrain: FWD.

Horsepower: 197 hp

Torque: 202 lb-ft

Exterior

The 2015 Ford Fiesta ST is built with unique bodywork that makes it practical, fast, and economical. It even produces a surprising sound when you pump the accelerator thanks to the dual exhaust tips. Fog lamps ensure enhanced visibility, and the sport-tuned suspension system provides a more comfortable ride experience. Rolling on 17-inch wheels and summer tires, it also boasts more responsive steering and upgraded brakes. If you need to swap out the old windshield wiper blades, you can do so on your own.

Performance

The 2015 Ford Fiesta ST houses a more robust motor than the other trim levels. This means that it can sprint from zero to 100 km/h in just 7.1 seconds - making it the quickest car in its class. Also, the full economy is stellar with a combined rating of 8.1 L/100 km (29 mpg).

Contact Ford Parts BC to find everything you need for your 2015 Ford Fiesta ST!