If you live in BC and need to stash your ford vehicle in storage while you travel, then you have come to the right place. Contrary to popular belief, it is not a good idea to just park your car and leave for a month. Vehicles are designed to be driven, and a lot of problems can arise if the proper steps are not taken to preserve them while you are gone.

First, you need to fill up the gas tank. While this is something you may not have thought of, it stops condensation from building up during its stationary period. You should also add a fuel stabilizing agent and go for a spin to distribute the mixture throughout the engine components.

Next, you would wash and wax the vehicle to protect the finish. Shielding it with a car cover (even if it is inside a garage) is another good idea. You can also put a vapor barrier underneath it. A 4-mil polyethylene drop cloth is recommended. Just lay it on the floor and park on top of it.

Don’t forget to disengage the parking brake to prevent corrosion. If you’re going to be gone for a really long time, you may also want to take off the wheels and raise the vehicle onto jack stands. Finally, disconnect the battery and plug the tailpipe with a rag.

Contact Ford Parts BC to purchase a car cover!

If you have ever needed maintenance or repairs done to your Ford vehicle, then you have probably been asked by a mechanic if you prefer OEM or aftermarket accessories. If this question is confusing, then keep reading to find out the difference between the two terms.

Aftermarket accessories are pieces of equipment that are not included in the vehicle when it leaves the factory. Typically purchased as auto body shops or used car dealerships, these third-arty elements have been reverse engineered from the original piece. They are typically cheaper than OEM parts; however, they do not last as long. They also do not always fit properly since they are not crafted using factory specifications. This can lead to malfunctions and even significant damage to the vehicle down the road.

OEM stands for “Original Equipment Manufacturer”. This means that these pieces were made by the brand’s factory. They are precise replicas of the parts that need repair. When you replace a broken or worn down element with an OEM part, it will be as if it was never damaged or changed. It is as close to new as you can get.

Contact Ford Parts BC to order OEM pieces online now!

One of the biggest fears when driving on a remote highway at night is hitting deer as it attempts to cross the road. While some people may think there is nothing to be done about this type of accident, adaptive headlights can help a lot.

Instead of projecting a beam in one direction only, this style of lamp will turn as your maneuver the steering wheel. Not only does this illuminate the path through bends and corners, but it can also grant visibility on obstacles that may have been otherwise in the dark.

Sometimes referred to as matrix headlights, they almost exclusively come with LED bulbs. Small mirrors are also found inside the housing units that allow the beam to be manipulated in a multitude of ways.

Some models may also include adaptive high beams. These bright lights will toggle down to low when another car approaches. Thanks to sensors that are used to detect oncoming traffic, you don’t have to worry about blinding another traveller.

Do you need new lighting elements for your Ford vehicle? Get in touch with the team of agents at Ford Parts BC to find the right equipment! You can order online in a matter of minutes.

One of the most highly sought after safety features on newer vehicles is known as Adaptive Cruise Control. Usually reserved for top-tier trim levels, this driving aid is designed for security, convenience, and to reduce fatigue.

Not only does it allow you to set a speed limit, but also enables you to choose a following distance. The mechanism will maintain that distance even if it means lowering the rate of travel. Furthermore, it uses a series of cameras and sensors to detect the flow of traffic up ahead. If the pace begins to slow, so will your Ford.

The great thing about this component is that you no longer have to stress out about accelerating and braking during heavy rush hour congestion. You can sit back and let the function work its magic without any extra input from you.

When the way clears up, the vehicle will return to its originally set speed. Also, with Ford models, Lane Centering has been added into the mix. This monitors the lines on the road to ensure that you do not deviate from the designated path. If you veer off to the side, it can correct your course.

Need to upgrade the technology on your transport? Contact Ford Parts BC to find the right pieces!

Over recent years, safety systems inside vehicles have become much more advanced. One of the most highly sought after driving aids these days is the Active Pedestrian Protection System.

In short, this is an electronic mechanism that is designed to alert drivers to the presence of people in the street up ahead.

With Ford vehicles, this function is paired with a forward collision warning system. Using a series of sensors and front-mounted cameras, it will monitor the road and let you know if an obstacle is in your direct path. It works for pedestrians too.

If no evasive action is taken by you to avoid an accident, the component can take control of the emergency brakes. This will bring the automobile to a complete stop before an impact is made. The following terms can be used interchangeably depending on the model:

• Pre-Collision Assist with Automatic Emergency Braking
• Post-Collision Braking
• Forward Sensing System

All of the elements were created to do essentially the same job - which is to prevent head-on incidents. Perfect for urban areas, it keeps you safe as well as others.

Need to add better safety enhancements to your Ford vehicle? Get in touch with the agents at Ford Parts BC to see what’s in stock!

Otherwise known as the Active Cornering Enhancement Filter, the ACE Filter is a device found on electro-hydraulic suspension mechanisms. As it adjusts to the conditions of the road, it helps reduce the overall amount of body roll - which leads to a more comfortable experience from inside the cabin.

Sometimes referred to as furnace filters, they come in several different sizes.

The Active Cornering Enhancement is an anti-roll system that can counteract up to 1G of lateral acceleration. What’s even more impressive is that it completes this function in under one-tenth of a second. This provided stability and a faster response time when you move around turns and bendy roads. It also uses a set of accelerometers to determine the lean angle and send more accurate data to the computer. This will apply extra pressure to the torsion bars from the actuators and help balance out the movement.

Typically, you will find this piece on vehicles that are designed for off-roading. Not every car, truck, van, or SUV on the streets is equipped with this component.

Are you ready to order replacement parts for your Ford vehicle? Get in touch with the team of friendly agents at Ford Parts BC to begin your order to inquire about specific units.

Although every element inside a modern vehicle is important for smooth operation, you won’t be going anywhere without the accelerator pedal. While its purpose is very straightforward - to move the car - you might not be aware of the crucial linkage that serves a major role in the overall function.

The accelerator pedal link is located between the accelerator and the carburettor. When your foot presses down on the gas, a certain air/fuel delivery process is initiated. As you continue to hold it down, it pivots and pulls on the throttle wire - which is connected to the link. This joint essentially controls the valve for engine air intake.

Without this tiny cable, oxygen would not be able to make it to the motor, and the automobile would not move. If it is faulty, the pedal could become stiff or even stick when you depress it. It may not release as normal, or it could also lack much motion at all. The “Check Engine” light will be activated if the link is bad. If this happens, you need to stop driving and get it repaired as soon as possible.

Are you ready to order new components for your model? Contact Ford Parts BC to start your online order!

If you have a modern vehicle, then you have probably heard the acronym “ABS” at some point. This stands for Antilock Braking System, and it is very important for safe driving.

This computer-controlled mechanism prevents the brakes from locking when you stomp on the pedal. It also prevents tire skids, which will ultimately help keep premature wear and tear away. There are four main parts that function inside this component.

First are the speed sensors. These will monitor how fast the wheels rotate. Next are the valves located inside the brake line. They block and release pressure from three different positions. Then, there is the pump. Filled with hydraulic fluid, it applies force to the calipers or drums as needed. Finally, the controller is an electronic unit often referred to as ECU. It takes the data from the aforementioned sensors and determines if braking is necessary or not.

As a whole, all of these things operate in unison. When a lock-up is detected, the ABS will active the brakes over 100 times per second. This enables you to have better control over the vehicle as you come to a halt.

Need replacement pieces for your ABS? Contact Ford Parts BC now!

Many components make an air conditioning unit work smoothly. One of the most crucial - yet easiest to replace - is the A/C drain hose.

Durable and highly flexible, this tube allows you to change out the coolant regularly. Typically constructed out of EVA and PE, it is designed to be resistant to frost. Non-toxic, anti-aging properties are also part of this mechanism. Meanwhile, the end of the hose that connects to the air conditioner outlet is thicker. This prevents deformation over time. Another function of the drain hose is to release any buildup of condensation that is being trapped inside the evaporator.

If your hose isn’t quite ready to be switched out with a new one, you can simply clean it out to prowling its lifespan. You will need the following materials:

• Evaporator cleaner
• Drain pan
• Safety gear (glasses, gloves, etc)
• New cabin filters

First, you need to raise the vehicle so that you can crawl underneath. Next, attach the can of cleaning solution to the hose via the provided nozzle. Input about 1/2 of the contents of the can, and let it sit for five to ten minutes. Then, remove it and let the hose drain.

To buy a new A/C drain hose, contact Ford Parts BC now!