Maintaining the braking system of your Ford vehicle is critical. Over time, wear and tear can cause this intricate mechanism to malfunction. This can be potentially deadly. So, here are a few tips to keep your working in tip-top shape.

First, check the brake pads and rotors. These parts are the contact points that stop the tires. Due to frequent friction, they can become worn down quite quickly. If you smell a burning odour or notice a slow response when you step on the brake pedal, these could be indicators that they need to be replaced.

Next, you should routinely flush the brake fluid. Used to transfer pressure from the pedal to the pads/rotors, this liquid is vital to proper function. However, it can cause corrosion. If it becomes milky or cloudy, it needs to be replaced.

Another thing you can do is bleed the brake line. When excess air is stuck, the entire system can begin to deteriorate. You can clear it out after flushing the fluid. Finally, upgrading to slotted disc brakes is a great way to make the system last longer. This version is more resistant to heat. You could also switch to ceramic pads to reduce noise.

Contact Ford Parts BC to order new pieces now!

If you have ever needed to pull an attachment of some sort behind your truck or SUV, then you are probably familiar with the tow hitch.

Sometimes referred to as a trailer hitch, this piece connects to the chassis of your vehicle. It can come in several different forms including a ball, bar, or hook. Each one allows for a swiveling action to take place during transportation which enables movement. In other words, it provides flexibility to turn and reverse with a trailer or camper in tow.

Ball mounts are the most popular in Canada. Generally, they are organized into five classifications with varying load limits. They are as follows:

• Class I: 910 kg (2,000 lbs)
• Class II: 1,600 kg (3,500 lbs)
• Class III: 2.300 kg (5,000 lbs)
• Class IV: 4,500 kg (10,000 lbs)
• Class V: 7,700 kg (17,000 lbs)

To install a ball mount, you will also need a receiver hitch. This is a tube-shaped component that can be bolted or welded to the chassis. The tow hitch will be attached here. A typical unit for Ford models usually measures 5 cm (2-inches) and is forged in one piece. Resistant to corrosion, it will last a lifetime.

Contact Ford Parts BC to start your order now!

If you want to add floor protection to your 2019 or 2020 Ford Expedition, then you can get a set of all-weather mats.

Crafted from thermoplastic rubber, these water-proof pieces are heavy-duty with deep grooves and raised ridges. This intricate design catches mud, snow, and other particles. Meanwhile, the nibbed backing prevents them from sliding around, and they are compatible with all trim levels from the aforementioned production years.

Ready to purchase handy floor mats for your SUV? Get in touch with Ford Parts BC to start your order.

Are you looking for a way to make your Ford pickup more aerodynamic? If you said yes, then you may want to add a tailgate spoiler to the back of your 2020 F-250 or F-350.

This all-inclusive kit comes with everything you need to create a lip on the tail of your heavy-duty truck. Designed to improve fuel efficiency by cutting down on wind resistance, it will have your vehicle slicing through the air like a hot knife through butter.

Contact Ford Parts BC to order one now!

Since the 2020 Ford F-350 XLT is a Super Duty pickup with plenty of power, you can also add extra pieces to enhance its overall capabilities. Available at Ford Parts BC, you can find these components with a few clicks of your mouse.

Make: Ford

Model: F-350

Power

Engine: 7.3 L V8.

Transmission: 10-speed automatic.

Drivetrain: RWD or 4WD.

Horsepower: 430 hp

Torque: 475 lb-ft

Towing

The 2020 Ford F-350 XLT can tow up to 5,896 kg (13,000 lbs) depending on the body style and engine. With that in mind, you can also add a Trail Hitch Drawbar or Ball. The Drawbar style is a mount with a 0-inch drop and a 2-3/4-inch rise. It is compatible with over 250 Ford vehicles, and it can be installed in under an hour. Meanwhile, the Ball measures 2-inches with a 1-inch shank. It has a 2,267 kg (5,000 lb) limit.

Exterior

The 2020 Ford F-350 XLT can also be fitted with other outside elements. First are the 5- to 6-inch aluminum step bars. Coated in either black paint or chrome, these lightweight, rugged devices allow easy access to the cabin. They are also slip-resistant for sure footing. Running boards can also be installed along with rear deflectors and splash guards.

Need replacement parts for your 2020 Ford F-350? Contact Ford Parts BC now to start your order now.

There are many components that go into an engine. This means that motor maintenance comes with a lot of tasks to go through on the checklist. However, this handy article should make it easier to understand to properly care for your powertrain.

First, you must check the oil regularly. If the engine is the heart of the vehicle, then the oil is the blood. Lubricating every element to ensure proper function is its main objective. Old, dirty oil can wreak havoc on an engine system.

Next, you should always make sure that your coolant is working well. This will prevent the motor from overheating. Regular tune-ups and routine maintenance should take care of these things.

Aside from the aforementioned duties, there are several other jobs you can do to extend the life expectancy of your engine. They are as follows:

• Check the timing belt
• Change the air filter
• Replace old drive belts
• Swap out the spark plugs and wires
• Get a new fuel filter

Staying on top of these things will prevent major problems such as engine seizures, misfirings, and even premature wear and tear.

Need to replace a few pieces on your Ford’s engine? Get in contact with the team at Ford Parts BC to start an order now!

First invented in the 1960s, wheel locks are anti-theft devices that are designed to stop people from stealing hubcaps, tires, and any other part of the wheel.

The set typically comes with four lug nuts that are styled to look like the standard units. Sometimes, these are referred to as “hidden” locks. A key is also provided. Crafted with special sockets that perfectly line up with the pattern of the locks, it is used to remove the pieces of the wheel when you need to change a tire. The key can be stored in the glove box or with the spare.

When installing these components, you need to ensure that it is properly torqued. A torque wrench is the best tool for installation. If the piece isn’t put on correctly, it may come loose and give off a rattling sound.

The best part is that wheel locks are impossible to remove without the appropriate key. There isn’t enough space around them for any type of prying tool to fit. So, what happens if you lose the key? You can get a replacement from the manufacturer or dealership.

Need to purchase a set of wheel locks for your Ford vehicle? Get in touch with the team at Ford Parts BC to place an order!

If you are searching for a way to keep your hubcaps safe, then you may need wheel locks.

For the 2000 Ford Focus - as well as numerous productions of the Escape and Fusion - you can purchase a set of zinc-plated lugs. These hidden nuts provide protection against theft. There are four in a set, and you only need to replace one lug nut on each wheel in order for them to work. A key is also included for easy removal.

Contact Ford Parts BC to get yours today!

When purchasing parts online, you shouldn’t have to wait a month for your package to arrive. That’s why all in-stock orders ship out within 24 hours at Ford Parts BC.

If you buy something on the weekend, then it will be sent the next business day. It usually takes two to seven days for the shipment to make it to your location. Oversize orders may take longer. At the present time, international shipping is not available.

Contact the team at Ford Parts BC for answers to any other questions.

As a vehicle’s engine runs, fuel is transformed into energy which produces a great deal of heat. To prevent the vehicle's motor from burning up, a cooling system has been added to the mix. This mechanism tones down the temperature and keeps it regulated.

Made up of several parts - including the radiator, hoses, thermostat, and water pump - this features contains a mixture of antifreeze (coolant) and water. constantly flowing throughout the system it drops the temperature down to prevent an excessive buildup of heat. If this component is not functioning properly, severe damage can be incurred.

Check your car’s coolant system by performing the following actions:

• Drain - Allowing the old fluid to be removed, simple draining will eliminate contaminated liquid and particles.
• Check the Thermostat - Aging models will eventually fail. Without a working thermostat, you have no way of knowing how hot the engine is.
• Refill - If the component is low on fluid, topping it off could be the solution.
• Run a System Analysis - If you did the two things listed above and there is still an issue, you will need to have a mechanic run a total system analysis to identify the source of the problem.

Need coolant system parts? Contact the experts at Ford Parts BC to find the right pieces.